Product RFG

The RFG: RF generator for plasma thrusters

The RFG turns spacecraft bus power into RF drive for the thruster antenna. One GaN generator, paired with the AIMN adaptive matching network or used on its own.

StatusEngineering model in development, TRL 4 to 6. MHz Labs, Seville.

RFG engineering model: a matte black enclosure marked MHz Labs RFG RF Generator, with a D-sub power connector, an N-type RF connector and mounting flanges.
Helicon antenna around a quartz tube with a plasma discharge in a laboratory.

01 RFG

Design targets.

50 to 500 W
RF output
1 MHz +
RIT-class near 1 MHz, higher for helicon
2 x 28 V
Bus input, 18 to 40 VDC
< 2 kg
Mass

02 Specification

Specification

  1. 01

    50 to 500 W RF, RIT-class near 1 MHz, higher for helicon sources.

  2. 02

    Power set in software, roughly a 10:1 range, no mechanical tuning.

  3. 03

    Rides through load mismatch on fast hardware protection, no circulator on the mass budget.

  4. 04

    Two redundant 28 V DC inputs, 50 ohm coaxial RF output.

  5. 05

    COTS-first, European, ITAR-free.

ParameterDesign target
RF output power50 to 500 W
Operating frequencyRIT-class near 1 MHz, higher for helicon sources
DC inputTwo redundant 28 V DC (standard bus), 18 to 40 VDC design range
Power stageGaN, switch-mode
Power controlSoftware-set, about 10:1 range, no mechanical tuning
Load toleranceVSWR ride-through without a circulator or isolator
RF output50 ohm coaxial; antenna match or the AIMN adaptive network as a separate downstream module
EMCLow radiated emissions from a switch-mode stage
Command and telemetrySpacecraft data bus, autonomous fault handling
Mass and envelopeUnder 2 kg
ThermalConduction to a baseplate or cold plate
Supply chainCOTS-first, European, ITAR-free
Power you set in software

Output power is set in software over roughly a 10:1 range, with no mechanical tuning. The adaptive matching network holds the amplifier at its design load as the plasma drifts, so nothing that would be impractical to adjust in orbit ever needs to be. Commercial plasma RF generators have worked this way for decades; the RFG brings it to a flight form factor.

Rides through load mismatch, no circulator

An RF plasma load can swing hard at ignition and reflect power back into the amplifier. The common protection is a circulator or isolator at the output, which works and costs mass and volume. The RFG rides through mismatch and antenna faults with fast hardware protection instead, so none of the mass budget goes to a circulator.

Which thrusters it fits

The core is thruster-agnostic. It maps to helicon and ICP thrusters at higher frequency and gridded RF ion thrusters near 1 MHz. Background in the technical guide.

Open vacuum chamber with an aluminium test fixture on rails in a bright laboratory.

03 Contact

Building an RF or helicon thruster?

Tell us your thruster and RF requirement. We send the design-target specification and block architecture.

Talk to our engineering team